Garmin 1040

The NEW Garmin 1040 and has an elongated back lower edge.  This edge makes this Garmin longer than any other Garmin cycling computer to date.  The ENVE Road Stem Combo mount has interference when run in it’s alternative position with the Garmin 1040. Please see below instructions for mounting your ENVE Road Stem Combo Mount to accommodate your Garmin 1040.

The configuration below will work with a 1040...

However, the configuration below will have interference between the tail of the 1040 and the mounting screws...

Garmin 1050

The Garmin 1050 is overall a larger computer than prior generations of Garmin. It also has a slightly offset mounting interface on the back of the computer. This results in the computer sitting much closer to stems and handlebars on K-Edge Mounts. As a result, when using this computer with a stock ENVE computer mount, it likely will fit, but the computer may come in very close to contacting the stem face plate. 

K-Edge is working on a new insert for their computer mounts specific to the 1050. It will attach to any existing K edge Garmin mount, including the ENVE versions, and allow the 1050 to be elevated and moved forward slightly in the mount. This product should be available directly from K Edge in early October 2024.