Information on converting your ID360 ENVE road hub to use a Shimano Microspline Driver
Currently, ENVE does not offer a stock road ID360 hub with a Microspline driver equipped rear wheel. However, using Mavic ID360 Microspline freehubs available in the aftermarket, you can convert your ID360 ENVE hub to Microspline.
To do this, you'll:
- Need to separately source an ID360 Microspline driver from an authorized Mavic parts vendor.
- Mavicparts.com is a great source for all things Mavic small parts, such as this MS driver, which they offer.
- Swap out your current freehub for the ID360 Microspline driver.
- Install ENVE's XDR/Campy Drive Side Rear endcap on the Microspline driver. You can find that here: https://www.enve.com/product/end-cap/ under the SKU: 100-4001-416